looking for an installer in MD vacinity...
Thread Starter
Pro
Joined: Aug 2007
Posts: 506
Likes: 1
From: annapolis md
looking for an installer in MD vacinity...
I recently purchased the ssa headers/xpipe and thunderbolt cats for my 2000 m6. i live in annapolis, MD and am looking for an experienced person/shop to install it all for a very good price.
i am not an experienced mechanic in the slightest. i am not sure if things will need to be welded or cut, i have no clue. i have a borla stinger catback if that makes any difference and the rest of the car is stock except for k&n fipk intake.
thanks a bunch
~ nick
i am not an experienced mechanic in the slightest. i am not sure if things will need to be welded or cut, i have no clue. i have a borla stinger catback if that makes any difference and the rest of the car is stock except for k&n fipk intake.
thanks a bunch
~ nick
Racer
Joined: Sep 1999
Posts: 416
Likes: 11
From: Baltimore MD
Header Install
Nick I did mine myself, was not easy, had to jack up the motor and drop the steering, but it can be done. It took a couple of weekends since I was work alone. Take a look at Tony's in Gathersburg, I had my tune done there and am real happy with the results. You could get both at the same time.
Ron
Ron
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
