Hidden N02 Install?
Thread Starter
Drifting
Joined: May 2001
Posts: 1,962
Likes: 0
From: syracuse NY
Hidden N02 Install?
I'm just curious if anyone here has done a hidden Nitrous install. If you have could you show some pictures. Where did you put your bottle, in one of the rear compartments?
Thanks,
Christian
Thanks,
Christian
Melting Slicks
Joined: Aug 1999
Posts: 2,858
Likes: 0
From: Northern Calif/ San Juan Island, Wa
Re: Hidden N02 Install? (HGlide82)
Mounted N20 bottle in rear center section, cover fits over bottle perfect. Make sure and turn bottle about 35 degree angle to take advantange siphon tube during acceleration :D
All switchs are mounted in ash tray.
Solenoids mounted front frame section. Uses stock air cleaner bolt holes.
All switchs are mounted in ash tray.
Solenoids mounted front frame section. Uses stock air cleaner bolt holes.
Thread Starter
Drifting
Joined: May 2001
Posts: 1,962
Likes: 0
From: syracuse NY
Re: Hidden N02 Install? (chuckster)
Well Umm If it was hidden how would you know if it was in the picture...
BTW JetSkiFast, you're install looks ver nice! Thanks for the pictures
Racer
Joined: Jul 2000
Posts: 412
Likes: 0
From: Canastota, ny
Re: Hidden N02 Install? (HGlide82)
Christian, us Syracuse guys want to know which car this question applies to??? Sounds lke you are starting to take this Erie Blvd stuff just a little to serious!! Paul, from warm & sunny central NY.
Pro
Joined: Feb 2000
Posts: 651
Likes: 0
From: PINEBROOK , NJ
Re: Hidden N02 Install? (HGlide82)
When I installed my kit I went for the hidden look :eek: I mounted my switches in the ash tray the bottle in the back not hidden so I can reach it from the drivers seat.I mounted the solenoids under my fuel rail covers,From under the hood you would never know i was spraying. I can e-mail you some pictures because I do not know how to post them here :D :cheers:
Drifting
Joined: Jun 1999
Posts: 1,272
Likes: 0
From: South Carolina
Re: Hidden N02 Install? (HGlide82)
Jetskifast,
You've got a nice install. That being said, only part of it is hidden, cause if you can see it when you pop the hood, it's not hidden. The guys around here (South Carolina) are very sneaky. Lots of cars have N20, but it's really hard to find the solenoids, feed lines, and relays under the hood. I see you've wrapped your feed line with friction tape, which is a start, but still not hidden. But I like what you've done with the rest of it.
You've got a nice install. That being said, only part of it is hidden, cause if you can see it when you pop the hood, it's not hidden. The guys around here (South Carolina) are very sneaky. Lots of cars have N20, but it's really hard to find the solenoids, feed lines, and relays under the hood. I see you've wrapped your feed line with friction tape, which is a start, but still not hidden. But I like what you've done with the rest of it.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Melting Slicks
Joined: Sep 1999
Posts: 2,521
Likes: 0
From: Houston, TX
Re: Hidden N02 Install? (Eric94)
Get creative. That's all I can say about hiding a nitrous kit. There are many places you can hide the solenoid etc... Oh yeah, and get a dry kit... so much easier to hide. When done right it will be invisible unless the back of the car is open and the cover is off the center compartment. :D
Drifting
Joined: Jul 1999
Posts: 1,434
Likes: 0
From: Miami, Fl
Re: Hidden N02 Install? (jetskifast)
Mounted N20 bottle in rear center section, cover fits over bottle perfect. Make sure and turn bottle about 35 degree angle to take advantange siphon tube during acceleration :D
All switchs are mounted in ash tray.
Solenoids mounted front frame section. Uses stock air cleaner bolt holes.
All switchs are mounted in ash tray.
Solenoids mounted front frame section. Uses stock air cleaner bolt holes.
:lol:
[Modified by Skeeter1, 12:46 PM 11/15/2001]
Melting Slicks
Joined: Aug 1999
Posts: 2,858
Likes: 0
From: Northern Calif/ San Juan Island, Wa
Re: Hidden N02 Install? (Skeeter1)
My mistake I thought poster was looking for bottle locations to be hidden, cover goes over bottle.
Solenoids can be mounted in hidden locations and mount jet nozzle from underneath air bridge.
Skeeter1
No tape used in my install. Maybe you think velcro strap for bottle heater is tape? Or maybe the black plastic cover on the stainless lines are tape?
Solenoids can be mounted in hidden locations and mount jet nozzle from underneath air bridge.
Skeeter1
No tape used in my install. Maybe you think velcro strap for bottle heater is tape? Or maybe the black plastic cover on the stainless lines are tape?
Racer
Joined: Jul 2001
Posts: 446
Likes: 0
From: San Antonio tx
Re: Hidden N02 Install? (jetskifast)
The 1st picture is the solenoid underneath the Brake master cylinder
The 2nd picture is the bottle mounted in the back, with the bracket mounted to the original cd changer bolts.
The 3rd picture is the hidden nozzle going into the MTI ram air box.
Daren
[Modified by LovintheC5, 4:33 PM 11/15/2001]