shifter adjust question
Thread Starter
Pro
Joined: Dec 2004
Posts: 534
Likes: 0
From: New Brunswick
shifter adjust question
I'm in the process of adjusting my shifter... I even lined up the moon shaped cutout of the shifter shaft perfectly with the bolt hole. Problem is, my reverse still kicks out. It seems a bit better though.
In what direction should I be adjusting the shifter in order to fix this? or does this mean it's something elese (bent fork, etc)
any advice would help
Denis
In what direction should I be adjusting the shifter in order to fix this? or does this mean it's something elese (bent fork, etc)
any advice would help
Denis
Twin Turbo Coupe
Joined: Apr 2005
Posts: 768
Likes: 0
From: Frederick MD
check for damaged bushing where the shifter box bolts to the torque tube. There is also some forward & backwards adjustment that can be done there too...Also make sure the black wedge at the bottom is seated into the slot on the torque tube
Burning Brakes
Joined: Sep 2007
Posts: 980
Likes: 18
From: Columbia, SC
Senna...
Well, I know nothing of your shifter, but I will say that Ayrton Senna is my life long hero. I almost got SENNAF1 for a custom plate, but assumed no one would get it. You just don't see or hear that name anymore. Mad props.
