headlight problem
Thread Starter
Melting Slicks
Joined: Jan 2008
Posts: 2,535
Likes: 378
From: NSL UT
headlight problem
moved this post over from general topics, Have a problem with my lights not coming on. Turn the switch and they pop up but do not light, tail lights are the same. They do work with a jump switch in micro relay #43 and #44 in the inside fusebox. multi function switch or ground maybe? relays are good got them tested. thanks for any help.
Burning Brakes
Joined: Apr 2007
Posts: 966
Likes: 9
From: Phoenix AZ
Does your car have the Twilight Sentinel option? If so, do the lights come on when it is enabled (and dark outside, or cover the dash sensor).
I just ordered a new multi-function switch today to fix a problem where the headlights come on, but the taillights do not.
I just ordered a new multi-function switch today to fix a problem where the headlights come on, but the taillights do not.
Racer
Joined: Feb 2007
Posts: 431
Likes: 5
From: Chico CA
Could well be the switch. There are contacts for the headlight doors, and another set of contacts for the actual lamps. They have been known to make weak contact (not enough pressure to really connect), but can be corrected if you're a little bit brave. Here's the link to the thread...
http://forums.corvetteforum.com/show...p?p=1563499998
http://forums.corvetteforum.com/show...p?p=1563499998
Burning Brakes
Joined: Apr 2007
Posts: 966
Likes: 9
From: Phoenix AZ
Could well be the switch. There are contacts for the headlight doors, and another set of contacts for the actual lamps. They have been known to make weak contact (not enough pressure to really connect), but can be corrected if you're a little bit brave. Here's the link to the thread...
http://forums.corvetteforum.com/show...p?p=1563499998
http://forums.corvetteforum.com/show...p?p=1563499998
Man, that looks like an easy fix, too!
EDIT: I just spent an hour and fixed the problem per the linked thread above. Sorry to hi-jack the post... Thanks!
Last edited by RoccoC5; Jan 31, 2008 at 09:56 PM.
Thread Starter
Melting Slicks
Joined: Jan 2008
Posts: 2,535
Likes: 378
From: NSL UT
Could well be the switch. There are contacts for the headlight doors, and another set of contacts for the actual lamps. They have been known to make weak contact (not enough pressure to really connect), but can be corrected if you're a little bit brave. Here's the link to the thread...
http://forums.corvetteforum.com/show...p?p=1563499998
http://forums.corvetteforum.com/show...p?p=1563499998
