Z06 Intake on 2000 LS1
Thread Starter
Burning Brakes
Joined: Apr 2007
Posts: 966
Likes: 9
From: Phoenix AZ
Z06 Intake on 2000 LS1
I just picked up a stock intake assembly from a 2004 Z06. I planned on just swapping the lid, but would it do me any good to swap the bellow and the coupler? Are they any different? I know that I shouldn't swap the MAF, so I'll probably list it for sale. 
Tech Contributor
Joined: Jan 2007
Posts: 19,474
Likes: 1,171
From: Dyer, IN
What "lid" are you speaking of?
Tech Contributor
Joined: Jan 2007
Posts: 19,474
Likes: 1,171
From: Dyer, IN
I wish it was an LS6 intake manifold...
Burning Brakes
Joined: Jul 2006
Posts: 968
Likes: 12
From: Regina Sask
Only the lid will fit from the 2004 to your 2000. The 2000 & older C5's had the IAT sensor in the air bridge, the 2001 & up C5's had a larger Maf sensor with an integral IAT sensor. And the smaller 2000 Maf won't fit into the 2001 & up airbox.
Or you could purchase a Maf jumper harness from Casper's, then you could install the larger 2001 & up Maf sensor, air bridge & air box. Then you would need to get the Maf tuned with a wideband & Hp Tuners.
Russ Kemp
Or you could purchase a Maf jumper harness from Casper's, then you could install the larger 2001 & up Maf sensor, air bridge & air box. Then you would need to get the Maf tuned with a wideband & Hp Tuners.
Russ Kemp
