A new HVAC problem
Thread Starter
Racer
Joined: Oct 2002
Posts: 321
Likes: 0
From: Holland(the Netherlands) Europe
A new HVAC problem
Did my own LED conversion and everything works great.
I did one on another HVAC unit and here's the problem:
As I plug the HVAC in,the blue lights(LED's) come on,the display gets crazy(all the numbers light up)and the orange(LED's)lights which are standard for the control buttons flash along ON and OFF(in a 2 second period) with the display.Every few seconds I hear a sound from under the dahs(actuators?)and the flashing cycle repeats itself...
What's wrong....is it fried or what....
Greetz Erik.
I did one on another HVAC unit and here's the problem:
As I plug the HVAC in,the blue lights(LED's) come on,the display gets crazy(all the numbers light up)and the orange(LED's)lights which are standard for the control buttons flash along ON and OFF(in a 2 second period) with the display.Every few seconds I hear a sound from under the dahs(actuators?)and the flashing cycle repeats itself...
What's wrong....is it fried or what....
Greetz Erik.
Last edited by Erik88vette; Apr 4, 2008 at 07:56 AM.
Thread Starter
Racer
Joined: Oct 2002
Posts: 321
Likes: 0
From: Holland(the Netherlands) Europe
No HVAC DTC's what so ever...Not that strange because all the functions of the buttons are working just fine although you can't see the changes because of that eratic LCD display.There is a clicking noise everytime the display flashes on and off.It definately comes from one of the actuators which is powered if the dsiplay flashes....after 2 seconds the display flashes again and again a click.The clicking is from that little vacuum jar under the dash.Any suggestions??
Greetz Erik.
Greetz Erik.
