What shift knobs fit the new MGW shifter??

Reply Subscribe

Thread Tools

Search this Thread

Apr 14, 2008 | 10:00 PM

Fartpipe

Thread Starter

Le Mans Master

Joined: Sep 2006

Posts: 9,105

Likes: 166

From: PA

What shift ***** fit the new MGW shifter??

I just purchased my MGW shift **** with both levers. The C5 and the C6 shift lever. I have a C6 shifter ****. HOwever I dont have a shifter ball to put on the shift lever. I'm looking for a small shifter ball around the 1 3/4-2.0in round shift ball. Alot of them are 2.25 and they are way to big and horrible for shifter feel. The threads are 9/16-18 for this shift lever. Is that what stock C5 shifter ***** are? I thought they were smaller threads.

Apr 14, 2008 | 11:23 PM

MJD

Safety Car

Joined: Sep 2004

Posts: 4,762

Likes: 0

Yes, C5 shifter is 9/16 - 18. Just pick up a standard 2" black cue ball, drill and tap it. Works great. Cost about 15 bucks including the tap.

Apr 15, 2008 | 05:39 AM

SJSZ06

Burning Brakes

Joined: Sep 2007

Posts: 930

Likes: 3

From: Lawrenceville GA

Quote:

Originally Posted by MJD

Yes, C5 shifter is 9/16 - 18. Just pick up a standard 2" black cue ball, drill and tap it. Works great. Cost about 15 bucks including the tap.

I thought all cue ***** were white!

I recently put an MGW shifter in my Z and went with their "gripper" shift ball. I like it a lot - not much chance of getting slippery when wet,
and it has the shift pattern on top for those times when my wife drives the Z (hasn't happened yet...)!

Reply Subscribe