Line Locks -- Going to start taking orders again
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Line Locks -- Going to start taking orders again
I'm just over a week from returning home, and have decided to start taking orders for line locks again. Estimate ship dates will be the week of May 26th. Any orders between now and friday next week will be completed over Memorial Day weekend and shipped ASAP the following week.
Currently I have one on the block, and have plenty of room for extras. I've got a good adapter supplier finally so I should have no problem keeping parts stock on hand.
www.c5linelocks.fastbird93.com
And some better news: You 97-98 guys with the rear mounted ABS pump.....your end may be in sight. I should be getting with a local member over Memorial Day weekend, and I have an idea that I think just may work like a champ.
Other stuff? I should be soon releasing an option for the line lock kits, an ash-tray replacing panel for clean mounting of the activation switch.
Also, look for some other products and a totally new web page to be coming from me here around the end of the month.
Thanks everyone!!!!
Currently I have one on the block, and have plenty of room for extras. I've got a good adapter supplier finally so I should have no problem keeping parts stock on hand.
www.c5linelocks.fastbird93.com
And some better news: You 97-98 guys with the rear mounted ABS pump.....your end may be in sight. I should be getting with a local member over Memorial Day weekend, and I have an idea that I think just may work like a champ.
Other stuff? I should be soon releasing an option for the line lock kits, an ash-tray replacing panel for clean mounting of the activation switch.
Also, look for some other products and a totally new web page to be coming from me here around the end of the month.
Thanks everyone!!!!
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Thanks Steve, although I can't officially say WHAT that freaking combination block is for. Between you and Don, I have yet to have a hiccup out of my car. It's been absolutely wonderful to drive and thrash on. Really top notch work you guys did.
Burning Brakes
Joined: Apr 2003
Posts: 908
Likes: 4
From: TROY MI
I'm just over a week from returning home, and have decided to start taking orders for line locks again. Estimate ship dates will be the week of May 26th. Any orders between now and friday next week will be completed over Memorial Day weekend and shipped ASAP the following week.
Currently I have one on the block, and have plenty of room for extras. I've got a good adapter supplier finally so I should have no problem keeping parts stock on hand.
www.c5linelocks.fastbird93.com
And some better news: You 97-98 guys with the rear mounted ABS pump.....your end may be in sight. I should be getting with a local member over Memorial Day weekend, and I have an idea that I think just may work like a champ.
Other stuff? I should be soon releasing an option for the line lock kits, an ash-tray replacing panel for clean mounting of the activation switch.
Also, look for some other products and a totally new web page to be coming from me here around the end of the month.
Thanks everyone!!!!
Currently I have one on the block, and have plenty of room for extras. I've got a good adapter supplier finally so I should have no problem keeping parts stock on hand.
www.c5linelocks.fastbird93.com
And some better news: You 97-98 guys with the rear mounted ABS pump.....your end may be in sight. I should be getting with a local member over Memorial Day weekend, and I have an idea that I think just may work like a champ.
Other stuff? I should be soon releasing an option for the line lock kits, an ash-tray replacing panel for clean mounting of the activation switch.
Also, look for some other products and a totally new web page to be coming from me here around the end of the month.
Thanks everyone!!!!
I just placed my order.
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Got it man!!! Will be getting on it next weekend (24th) and have it out to you promptly after that! Thanks for the order!
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
The actual lines and solenoid should only take about 30 minutes tops. But then you have to bleed the brakes and do the electrical side of things. I'd say that two to three hours should suffice if you are familiar with bleeding the brakes and running wires into the inside of the car.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Stay tuned then. I've got it mapped out how I'd like to see it unfold and have the one big contingency I can forsee already planned for. If everything unfolds right, I should be able to bring a kit to market ready to sell by mid June at the latest. I'm actually very excited to get a chance to try to make this happen.
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Bump for Friday and the weekend! I'm always here to answer any questions!
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Just a few more days to Friday, and then I'll be pushing these out again!
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
I'm expecting to have those available in the VERY near future as an add-on option for the line lock kits. I'm actually going to be launching a new website this weekend with everything listed.
Burning Brakes
Joined: Apr 2003
Posts: 908
Likes: 4
From: TROY MI
Instructor
Joined: Jun 2006
Posts: 136
Likes: 0
From: Ringgold GA
A plug and bump for a great product. I've had mine for a while. Easy install and works great.
Make sure you plug off those two open ports in the solenoid
Didn't see it in the directions (may have missed it) and didn't think about it until everything else was installed. Tight fit to get the lower one in and snugged up.
Make sure you plug off those two open ports in the solenoid
Didn't see it in the directions (may have missed it) and didn't think about it until everything else was installed. Tight fit to get the lower one in and snugged up.
Drifting
Joined: Sep 2005
Posts: 1,258
Likes: 0
From: Home Southern Maine
St. Jude Donor '08
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist