FAST 92 LS2 tbody guys inside
Thread Starter
Melting Slicks
Joined: Jan 2008
Posts: 2,394
Likes: 0
From: Goldsboro NC
FAST 92 LS2 tbody guys inside
what bellow are you guys using...i have a vararam...had a silicone bellow on there before the install....bought a SLP for the install thinking it fit better....with the bridge on the little studs the slp would barely reach the tbody....put the old silicone one back on and got it on enough so that the clamp would hole it on past the lip on the tbody...still need to find something better
and what are you guys plugging your intake with at the point where the AIR went into the intake....i just have it taped off to get me home
thanks
and what are you guys plugging your intake with at the point where the AIR went into the intake....i just have it taped off to get me home
thanks
Pro
Joined: Feb 2003
Posts: 623
Likes: 11
From: Ankeny IA
I'm using the smooth bellow that came with the larger air duct. When I had the '01 duct on there I just used a plain old smooth bellow from one of the Vette catalogs. I didn't have any big issues getting it to fit. If you are running into to problems with length, I think 4" silicon hose would work and could be cut to fit. The AIR tube hole in the breather I solved with a HELP grommet from O'Reilly's. I think it was meant to plug a PCV hole. Worked great.
