Bo rfa issues
Thread Starter
7th Gear
Joined: Nov 2007
Posts: 7
Likes: 0
Bo rfa issues
After resetting the bfo rfa codes 1016-1064-and 1096, they immediately reappear, even though everything seems to be working okay. Could anyone give me advice as to why this is happening and what i can do about it.
Safety Car
Joined: Jan 2001
Posts: 4,382
Likes: 681
From: Boise ID
Nothing to worry about. From the manual:
DIC Onboard Diagnostics Show DTCs U1016, U1064 and U1096 in History #PI00043 - (Jun 19, 2002)
DIC Onboard Diagnostics Show DTCs U1016, U1064 and U1096 in History
.
When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.
Condition/Concern:
DTCs U1016, U1064 and U1096 may be present when scrolling through the onboard diagnostics via the instrument cluster Driver Information Center (DIC).
Recommendation/Instructions:
This is a normal software function as long as the DTCs have a history status upon ignition cycling. No repair attempts should be made.
DIC Onboard Diagnostics Show DTCs U1016, U1064 and U1096 in History #PI00043 - (Jun 19, 2002)
DIC Onboard Diagnostics Show DTCs U1016, U1064 and U1096 in History
.
When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.
Condition/Concern:
DTCs U1016, U1064 and U1096 may be present when scrolling through the onboard diagnostics via the instrument cluster Driver Information Center (DIC).
Recommendation/Instructions:
This is a normal software function as long as the DTCs have a history status upon ignition cycling. No repair attempts should be made.
