LS6 Intake install quick question
Thread Starter
Melting Slicks
Joined: Nov 2005
Posts: 2,297
Likes: 156
From: Clayton New Jersey
LS6 Intake install quick question
Installing LS6 intake on my 2000 Coupe..water tube..do I remove the original water tube and just use the front section supplied with the kit? And, block off the rear outlets?
Thanks, Bill
Thanks, Bill
Intermediate
Joined: Sep 2008
Posts: 37
Likes: 2
From: Waco Texas
Yes, remove the old crossover tubes. Use the new ones supplied w/ your intake. There should be 2 blockoffs to use in the back and use the new crossover tube for the front. The LS6 intake will not clear the LS1 style coolant tubes because the bottom of the intake is shaped differently.
Have fun!
Chris
Have fun!
Chris
Thread Starter
Melting Slicks
Joined: Nov 2005
Posts: 2,297
Likes: 156
From: Clayton New Jersey
Yes, remove the old crossover tubes. Use the new ones supplied w/ your intake. There should be 2 blockoffs to use in the back and use the new crossover tube for the front. The LS6 intake will not clear the LS1 style coolant tubes because the bottom of the intake is shaped differently.
Have fun!
Chris
Have fun!
Chris
