Everyone need some help with a NX TPAS switch
Thread Starter
Race Director
Joined: Nov 2001
Posts: 11,530
Likes: 0
From: New Bloomfield Pa
Cruise-In VI Veteran
St. Jude Donor '03-'04-'05-'06-'07-'10
Everyone need some help with a NX TPAS switch
Almost done with my N20 kit...I have a NX TPAS switch it says to wire to the vehicles TPS output signal wire ???
If I am looking at the correct area there are 6 wires
Pink
White
Yellow
Blue
Purple
Green
So wich one is it? :seeya
If I am looking at the correct area there are 6 wires
Pink
White
Yellow
Blue
Purple
Green
So wich one is it? :seeya
Le Mans Master
Joined: Aug 2001
Posts: 7,064
Likes: 18
From: Arizona
Re: Everyone need some help with a NX TPAS switch (iceburgh68)
I just used the microswitch that came with the kit. You can mount the switch so that it only opens at full throttle. The TPAS swtich reads voltage since we have a fly by wire set up. Full throttle is 5 volts. If the switch fails it will fail open and allow 5 volts to flow.
just my .02
just my .02
