Wheel offsets?
The rim is slightly larger than the stock, it is 17 9.5 front and 18 10.5 back. The comment on the web site is "offset same as 01-04". Apparently that means the offset is different than on my vehicle, will that affect handling in any way, or have any other affect on the vehicle?
What size tire would you put on that rim?
For an inexpensive repro, what do you think of the corvettegarage chrome wheel?

The C5 wheels are tucked too far in compared to the wider Z06 size wheels. The Z06 wheels fit nice and flush with the fenders, which is what most aftermarket wheels strive for.
There is no other differences in the C5 years, suspension or bodywork between the (coupe/vert/Z06) models from 97-04, as far as wheel fitment is concerned, so if you'd like to see how they fit, just look at any stock Z06...they'll fit your 98 exactly the same.
For those size wheels, I'd suggest the stock Z06 tire sizes...265/40/17 front, and 295/35/18 rear.
It raised 2 more questions in my mind though:
1.) Does the different tire size mess up the speedometer/odometer?
2.) Looks like there is a much more limited selection of tires in that size? Anyone have recommendations on a tire for that size(or would I be better off to get the standard size rim)?

2. Refer to my posts in the thread linked below for tire size variations that will fit these wheels, as it covers exactly the same thing you are asking, and I don't feel like typing it all out again.

http://forums.corvetteforum.com/c5-t...tire-size.html
There are TONS of tire choices in those sizes, I'm not sure where you're looking.
Thanks again for all the help!


