Byunspeed damper and pully install
Thread Starter
Advanced
Joined: Feb 2009
Posts: 68
Likes: 0
From: South Central York Area PA
POWERBOND damper and pully install with ARP bolt
I am in the process of upgrading my procharger intake to stage two which requires the removal of the entire cooling system. While its apart I was going to install a new damper and pulley. I've read and researched the options and It appears POWERBOND is the way to go, although not the cheapest.
I will also get a new ARP bolt for the crank. But, I can't find a part # for it. I think this is it: http://store.summitracing.com/partde...1&autoview=sku
Also, Byunspeed's website (http://www.byunspeed.com/index.php?manufacturers_id=330) for the POWERBOND damper and pulley are confussing and I'm not sure which part # I need. It's sunday and they are closed.
Anybody got part #'s for an 2000 LS1 POWERBOND Damper and Pulley and ARP bolt?
I will also get a new ARP bolt for the crank. But, I can't find a part # for it. I think this is it: http://store.summitracing.com/partde...1&autoview=sku
Also, Byunspeed's website (http://www.byunspeed.com/index.php?manufacturers_id=330) for the POWERBOND damper and pulley are confussing and I'm not sure which part # I need. It's sunday and they are closed.
Anybody got part #'s for an 2000 LS1 POWERBOND Damper and Pulley and ARP bolt?
Last edited by BLWN2KC5; Apr 5, 2009 at 11:43 AM.
Instructor
Joined: Jan 2009
Posts: 116
Likes: 0
From: Port Townsend WA
I just ordered yesterday, a 25% under drive balancer (SUM-C2503), 78" belt(GTR-4060780), and replacement bolt (ARP-234-2503) for my 99 FRC.
I just posted this a week ago or so. It's not the same brand of balancer but I believe the ARP bolt # would be the same.
Good Luck and hope this helps...
Don
I just posted this a week ago or so. It's not the same brand of balancer but I believe the ARP bolt # would be the same.
Good Luck and hope this helps...
Don
