3 questions
Thread Starter
Pro
Joined: Nov 2005
Posts: 656
Likes: 5
From: McAlester Oklahoma
3 questions
What is the part number for the horn relay that is located in the fuze box under the hood?
My passenger side front turn signal doesnt work, suspect it is blown. Is there only one light that runs the turn signal and the daytime running lights? If so what is the part number for that?
Lastly, my turn signales will sometimes not work. I had this problem in my 00 Monte and behind the hazard light button was a long switch that controlled the turn signals and the hazard lights. I replaced this and havent had a problem since. Is this the sme for the vette?
Oh, 2003 coupe....
My passenger side front turn signal doesnt work, suspect it is blown. Is there only one light that runs the turn signal and the daytime running lights? If so what is the part number for that?
Lastly, my turn signales will sometimes not work. I had this problem in my 00 Monte and behind the hazard light button was a long switch that controlled the turn signals and the hazard lights. I replaced this and havent had a problem since. Is this the sme for the vette?
Oh, 2003 coupe....
Thread Starter
Pro
Joined: Nov 2005
Posts: 656
Likes: 5
From: McAlester Oklahoma
Bueller? Bueller?? Just kidding.
Figured out the horn, but I am still not sure on the bulbs. Is there two bulbs that make up the front turn signals and running lights? And it looks like the hazard switch does control the turn signals too.
Figured out the horn, but I am still not sure on the bulbs. Is there two bulbs that make up the front turn signals and running lights? And it looks like the hazard switch does control the turn signals too.
Instructor
Joined: Dec 2006
Posts: 155
Likes: 0
From: SJ CA
The front running light is also the turn signal. Mine has went out a few times and I've notice that the turn signal arrows blink very fast indicating the bulb is blown.
There is a relay switch mounted behind the hazard light button. That should be why your signals dont work. Mine is actually not working as well. I noticed if I wedge a folded piece of paper between the gap of the hazard botton, the signals will work. I know that sounds kinda ghetto but I haven't had tiime to take my radio out yet to fix.
There is a relay switch mounted behind the hazard light button. That should be why your signals dont work. Mine is actually not working as well. I noticed if I wedge a folded piece of paper between the gap of the hazard botton, the signals will work. I know that sounds kinda ghetto but I haven't had tiime to take my radio out yet to fix.
Thread Starter
Pro
Joined: Nov 2005
Posts: 656
Likes: 5
From: McAlester Oklahoma
So, with the lights, that bulb should not be a yellow bulb then? I tried looking it up through Autozone and it kept giving me a yellow light.
Yea, kinda ghetto man, but I hear ya on the time thing. I just got the car and havent had an hour to mess with it...!
Yea, kinda ghetto man, but I hear ya on the time thing. I just got the car and havent had an hour to mess with it...!
Instructor
Joined: Dec 2006
Posts: 155
Likes: 0
From: SJ CA
It is a dark yellow colored bulb for running light.
Pro
Joined: Dec 2007
Posts: 630
Likes: 0
From: Orlando / Daytona Beach Florida
If the bulbs and fuses are good, chances are the multifunction switch is bad. Just replaced mine yesturday, thanks to this forum I saved big money doing the job myself and you can too!
Melting Slicks
Joined: Jul 2006
Posts: 2,332
Likes: 31
From: Silver Spring MD
There are about 5 identical relays in the under hood fuse blox
I've been troubleshooting my horn and swapped relay 36 (horn) with relay 39 (fog lights). Others looked like involved with ignition so I left them alone. Gene Culley should be able to give you the PN. I think the are about $16 if it is defective.
BIGHANK
BIGHANK
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Racer
Joined: Aug 2007
Posts: 485
Likes: 0
From: Moline Illinois
The running lights/turn signal bulbs are pretty easy to swap out, had mine go bad a few times. Even ohmed them out with a meter and it said all was good, bought a new bulb and no issues since. Can go in from the top but will scrape your arm up a bit. If I remember right they are clear.
Just DO NOT drop the bulb in the light housing, learned that the hard way. A magnet helps but its going to take a while, not mutch for the magnet to hold onto.
Chris
Just DO NOT drop the bulb in the light housing, learned that the hard way. A magnet helps but its going to take a while, not mutch for the magnet to hold onto.
Chris
Thread Starter
Pro
Joined: Nov 2005
Posts: 656
Likes: 5
From: McAlester Oklahoma
Thanks for the info guys. The light is fixed. Going to replace the hazard switch before I change out the multifunction switch. Happened to my 00 Mone Carlo and that fixed it. As far as the horn, I think I have the right relay now, but it helps to have horns and when I finally found where they are supposed to be mounted and I have no horns period...!