Trans rebuild question
Thread Starter
Pro
Joined: Jul 2006
Posts: 557
Likes: 0
From: chiefland fl
Trans rebuild question
Hey guys, or Pete k, i have an 84 with the old 27 spline tranny that leaks and i want to change out, a buddy gave me a 30 spline 92' model
with high stall torque converter in it and all the heavy duty clutches and good stuff. i thought i would just use the tail shaft off my vette tranny but i just recieved my ATSG manual and Paul Zank DVD and on the front it has 5 different output shafts? and the corvette shaft im guessing is different than the one in my 92' trans, do i have to use the corvette shaft out of the older trans? im just a little confused here, thanks in advance! bill
with high stall torque converter in it and all the heavy duty clutches and good stuff. i thought i would just use the tail shaft off my vette tranny but i just recieved my ATSG manual and Paul Zank DVD and on the front it has 5 different output shafts? and the corvette shaft im guessing is different than the one in my 92' trans, do i have to use the corvette shaft out of the older trans? im just a little confused here, thanks in advance! bill
Tech Contributor
Joined: Jan 2007
Posts: 19,398
Likes: 1,139
From: Dyer, IN
Hey guys, or Pete k, i have an 84 with the old 27 spline tranny that leaks and i want to change out, a buddy gave me a 30 spline 92' model
with high stall torque converter in it and all the heavy duty clutches and good stuff. i thought i would just use the tail shaft off my vette tranny but i just recieved my ATSG manual and Paul Zank DVD and on the front it has 5 different output shafts? and the corvette shaft im guessing is different than the one in my 92' trans, do i have to use the corvette shaft out of the older trans? im just a little confused here, thanks in advance! bill
with high stall torque converter in it and all the heavy duty clutches and good stuff. i thought i would just use the tail shaft off my vette tranny but i just recieved my ATSG manual and Paul Zank DVD and on the front it has 5 different output shafts? and the corvette shaft im guessing is different than the one in my 92' trans, do i have to use the corvette shaft out of the older trans? im just a little confused here, thanks in advance! bill
