Headlight screw needed
Thread Starter
Racer
Joined: Nov 2005
Posts: 346
Likes: 0
The headlight is held in by three screws and those screws are the only thing holding the headlight in. I lost one of mine. The headlight still is firmly mounted by the two screws remaining. I figuered GM put three screws there for a reason. The screw threads are rather coarse because they screw into plastic.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
I THINK I understand which screw you are looking for. It is a self-tapping screw (one of three on each side) that holds the headlight capsule to the frame assembly. It does not appear to be available as a separate item. You will either have to rob one from a damaged/destroyed headlight assembly at a salvage yard, or take one of your remaining screws and match it up at your local hardware store or auto parts store.
Melting Slicks
Joined: May 1999
Posts: 2,573
Likes: 0
From: Tewksbury MA
If they are the three black screws that hold the black plastic Headlamp bezel to the headlamp, then the screws comes in 10 packs.
10 @ $.56 each from Gene
Part is described as
Back door - Interior trim - Molding - Screw Screw 1995 - 2000
I'll look for part number for ya if this is what you are looking for.
10 @ $.56 each from Gene
Part is described as
Back door - Interior trim - Molding - Screw Screw 1995 - 2000
I'll look for part number for ya if this is what you are looking for.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
If they are the three black screws that hold the black plastic Headlamp bezel to the headlamp, then the screws comes in 10 packs.
10 @ $.56 each from Gene
Part is described as
Back door - Interior trim - Molding - Screw Screw 1995 - 2000
I'll look for part number for ya if this is what you are looking for.
10 @ $.56 each from Gene
Part is described as
Back door - Interior trim - Molding - Screw Screw 1995 - 2000
I'll look for part number for ya if this is what you are looking for.
The ones he needs are zinc galvanized (silver colored) and require a 10mm socket or wrench to insert/remove.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
