Baseline Dyno vs. Vortex Intake - What to expect?
Thread Starter
Pro
Joined: Nov 2001
Posts: 725
Likes: 21
From: Dallas TX
Baseline Dyno vs. Vortex Intake - What to expect?
I baselined my '01 coupe Saturday at Speed Works in Lewisville. I'm planning on adding a Vortex intake in the next week or so. What changes should I expect in graph? I'd like to think that the uppper rpm range will kick up a little bit with the better breathing. Yes? No? Maybe?
Here's today's result:
Everett
Here's today's result:
Everett
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Re: Baseline Dyno vs. Vortex Intake - What to expect? (EBSDallas)
Just by itself I would plan on 8 to 12 hp.. If you add an exhaust plan on 12 to 15 :seeya
My 01 with just and Vortex and Corsa's dynoed 314
[Modified by CHRIS NJ C5, 10:37 AM 2/17/2002]
My 01 with just and Vortex and Corsa's dynoed 314
[Modified by CHRIS NJ C5, 10:37 AM 2/17/2002]
Racer
Joined: Jan 2002
Posts: 272
Likes: 0
From: Southlake TX
Re: Baseline Dyno vs. Vortex Intake - What to expect? (CHRIS NJ C5)
Wow, I just went to Speedworks today 2/20/2002 and my 2000 MN6 with B&B PRT Exhaust dynoed at :
318.6 RWHP and 321.4 RWTQ within 2 HP and TQ each run
I'm starting my mods this weekend which will consist of a Vortex, New Airbridge, Removing MAF Screen, 160 Thermostat, Variable Fan Control ...
I don't have the new Manifold that the 2001 has and my base TQ and HP are lower. That is strange. My car was actually a little hot as I had just driven from Southlake and they pulled me right in.
318.6 RWHP and 321.4 RWTQ within 2 HP and TQ each run
I'm starting my mods this weekend which will consist of a Vortex, New Airbridge, Removing MAF Screen, 160 Thermostat, Variable Fan Control ...
I don't have the new Manifold that the 2001 has and my base TQ and HP are lower. That is strange. My car was actually a little hot as I had just driven from Southlake and they pulled me right in.
