P0351-p0358 help!!
Thread Starter
Instructor
Joined: Jan 2006
Posts: 172
Likes: 0
From: Charleston SC
P0351-p0358 help!!
I just finished putting my car back togeather (swaped the 243 heads back to scock). that's the only thing different. I got it all back together and it ran fine until it got warm and then it started sputtering and now won't even idle. I have all 8 of the P035x codes (Ignition Control #1-8 Circuit) and have no idea as to what it might be. I did a search and only found one thread where someone had the same problem and there was never a solution posted. Any help would be greatly appreciated.
Thanks,
Chad
Thanks,
Chad
Thread Starter
Instructor
Joined: Jan 2006
Posts: 172
Likes: 0
From: Charleston SC
I guess I should have researched more before posting. It was just the ground wire on the back of the head. I swear I checked that bolt several times before I put the intake back on, guess I didn't. Anyway, after finding out that that is the ground specifically for the ignition control, I knew it had to be that. It was a pain in the a$$ to get to, but it drives perfect now.
