new ls2 throttlebody install : no start???
Thread Starter
Burning Brakes
Joined: Apr 2009
Posts: 762
Likes: 2
From: Kopavogur in Iceland
new ls2 throttlebody install : no start???
Hi
wasjust installing new Fast 92mm and new LS2 throttlebody on my Vette, and got the adapter wire for ls6 to Ls2...
But know after that it will not start up, only REDUCE ENGINE POWER, and PCM´s are P0220 h c , P2135 h c i know they are throttle body realeted these codes
what can this be?
What do you guys think?
Do i need to do some re-learn programm?
Is it ground wire realated or what.?
please help me out here....
thanks
Baezi
Iceland
wasjust installing new Fast 92mm and new LS2 throttlebody on my Vette, and got the adapter wire for ls6 to Ls2...
But know after that it will not start up, only REDUCE ENGINE POWER, and PCM´s are P0220 h c , P2135 h c i know they are throttle body realeted these codes
what can this be?
What do you guys think?
Do i need to do some re-learn programm?
Is it ground wire realated or what.?
please help me out here....
thanks
Baezi
Iceland
Thread Starter
Burning Brakes
Joined: Apr 2009
Posts: 762
Likes: 2
From: Kopavogur in Iceland
i have figured it out .....
one pin in one of the plug was bendt, that´s why the code´s came up and reduced power...
But the reason for no fuel/ no start waswhen i was changed the fast intake i musthave unplugged the ground connection G107 back of the left head.
g107 is the ground for ignition....
so a ssoon as i plugged it in ground it started up...
Baezi
Iceland
