17" Z06 fronts on the back
Thread Starter
Burning Brakes
Joined: Mar 2006
Posts: 1,095
Likes: 5
From: Oldham County Louisville, KY
17" Z06 fronts on the back
Are there any issues running the Z06 OEM fronts on the rear? Do I need a spacer or anything?
I want to use them for Drag Radials. Anyone else doing this?
Thanks
I want to use them for Drag Radials. Anyone else doing this?
Thanks
AMP Racing
Joined: Aug 2006
Posts: 10,756
Likes: 589
From: Washington TWP NJ
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
A lot of people use 17" fronts to use with drag radials. They work fine with no spacers. 
Some use 16" drag wheels (CCW, Weld, Bogart, etc) or Camaro wheels as well. With just a slight bit of grinding on the UCA and they fit great too.
I use 17" thin spokes for my Drag set-up with 275/40/17 Hoosier Drag Radials.
Some use 16" drag wheels (CCW, Weld, Bogart, etc) or Camaro wheels as well. With just a slight bit of grinding on the UCA and they fit great too.
I use 17" thin spokes for my Drag set-up with 275/40/17 Hoosier Drag Radials.
