experience required????
Thread Starter
Melting Slicks
Joined: Nov 2009
Posts: 2,536
Likes: 15
experience required????
Hello, I'm new to the C5Z but I've dove right in. I'm doing a
cam/LT-Xpipe/CA install as we speak. The question is while I'm doing these upgrade's is there anything I can be doing, as far as "free mods" ?? Like removing the air pump and stuff like that, or s**t I no longer need. Its a weekend warrior/steet-strip car, so I'm open to some pretty good mods. And also I live in a non-inpection state so everything is fair game. So please hook me up with some information so I can get this project wrapped up!!
Thanks...
cam/LT-Xpipe/CA install as we speak. The question is while I'm doing these upgrade's is there anything I can be doing, as far as "free mods" ?? Like removing the air pump and stuff like that, or s**t I no longer need. Its a weekend warrior/steet-strip car, so I'm open to some pretty good mods. And also I live in a non-inpection state so everything is fair game. So please hook me up with some information so I can get this project wrapped up!!
Thanks...
Last edited by LSOHOLIC; Jan 31, 2010 at 01:08 AM.
Tech Contributor
Joined: Apr 2007
Posts: 10,924
Likes: 78
From: Forney Texas
For my "track only car 
" I cut off the air tubes flush and welded up the holes with a MIG welder, ground down the welds and sanded them smooth. Then removed all related components. It's a lot nicer to work on the car without that crap there. Make sure your starter wires and block grounds are clean and tight while you have the exhaust off.
" I cut off the air tubes flush and welded up the holes with a MIG welder, ground down the welds and sanded them smooth. Then removed all related components. It's a lot nicer to work on the car without that crap there. Make sure your starter wires and block grounds are clean and tight while you have the exhaust off.
