I ****ed up, need help quick!
Thread Starter
Racer
Joined: Aug 2007
Posts: 444
Likes: 6
From: Richmond Texas
I ****ed up, need help quick!
I installed a oil pressure relocation kit last night from TPE, very nice piece BTW. Well at the same time I decided to delete my air system, well I was being stupid and pulling the passenger side of the system off and tore the wires off of the "cam position sensor" harness/clip. Now I pulled the clip apart without writing down the order in which the wires went. So I rigged the clip back and it appears I put them in the wrong order. Does anybody have a good picture of this clip/connection so I can see which order the wires go. Thanks guys.:o
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
