Help needed on Dual Cone install

Reply Subscribe

Thread Tools

Search this Thread

Apr 6, 2010 | 11:10 AM

4U2ENVY

Thread Starter

Burning Brakes

Joined: Mar 2008

Posts: 1,170

Likes: 0

From: Obama says I'm a bitter white guy clinging to my guns and religon and he's right

Help needed on Dual Cone install

I just purchased a dual cone intake from a fellow forum member and I have a question, or concern on the install. First it seems everything was shipped as promised. Now for the concern. The hose that fits around the dual and the throttle body seems to be the same size. However the throttle body measures 3 3/4 inches and the dual cone measures our to 3 1/2 inches. Seeing how there is a difference is this an issue or should I purchase a new rubber tube. Need assistance.

Apr 6, 2010 | 12:15 PM

TEC6

Melting Slicks

Joined: Feb 2005

Posts: 2,874

Likes: 0

From: Tn.

St. Jude Donor '10-'11

Quote:

Originally Posted by 4U2ENVY

Should not be a issue. Did you get a silicone coupler with the dual intake? If you did, then it should fit. If not, then go to Autozone to get a "Specter" silicone coupler that measures 3 1/2 -3 3/4.

Apr 6, 2010 | 12:19 PM

4U2ENVY

Thread Starter

Burning Brakes

Joined: Mar 2008

Posts: 1,170

Likes: 0

From: Obama says I'm a bitter white guy clinging to my guns and religon and he's right

Quote:

Originally Posted by TEC6

Should not be a issue. Did you get a silicone coupler with the dual intake? If you did, then it should fit. If not, then go to Autozone to get a "Specter" silicone coupler that measures 3 1/2 -3 3/4.

Tim,

Do you have a part#. I checked their site and found nothing.

Reply Subscribe