02 sensor positions

Reply Subscribe

Thread Tools

Search this Thread

Apr 9, 2010 | 06:12 PM

jmoody66

Thread Starter

Drifting

Joined: Jul 2007

Posts: 1,350

Likes: 19

From: In a house

02 sensor positions

I put in a new engine, again, and Im buttoning things up. Im told that either the front 02's or the rear 02's are swapped....in other words even though the connector up front is say on the passenger side....it is connected to the drivers side 02.
Is this true and is it fronts or backs?

Apr 9, 2010 | 06:21 PM

lucky131969

Tech Contributor

Joined: Jan 2007

Posts: 19,353

Likes: 1,125

From: Dyer, IN

Quote:

Originally Posted by jmoody66

It's not possible to swap the front sensors (using sensor made for the front). There rears are what you are referring to. Since the rear O2's go in at an angle, the wire harness for the left sensor runs down the right side of the tunnel, and vice versa.

Apr 9, 2010 | 07:12 PM

jmoody66

Thread Starter

Drifting

Joined: Jul 2007

Posts: 1,350

Likes: 19

From: In a house

Thanks

Quote:

Originally Posted by lucky131969

Your response was appreciated. Now I gotta get back to work......cuz I wanna drive this thing so bad.

Reply Subscribe