Side Corner Install?
Thread Starter
Instructor
Joined: Apr 2010
Posts: 165
Likes: 7
From: Newmarket
Side Corner Install?
I just ordered some clear side corners from JWMotoring.com with the LED strip in them. I cant find anything online on how to remove and install them. Has anyone done this and have any advice? I appreciate any help!
Burning Brakes
Joined: Nov 2003
Posts: 1,234
Likes: 5
From: Herriman UT
Just jack up the front of the car and remove the outer air deflectors and close-out panels. Then you will have a straight shot at the backside of the lamps. It's easy once the front end is up so you can work comfortably from underneath.
Edit; You will also need to remove the brake cooling ducts, I believe.
Edit; You will also need to remove the brake cooling ducts, I believe.
Last edited by geezel; May 15, 2010 at 09:40 AM.
Thread Starter
Instructor
Joined: Apr 2010
Posts: 165
Likes: 7
From: Newmarket
Just jack up the front of the car and remove the outer air deflectors and close-out panels. Then you will have a straight shot at the backside of the lamps. It's easy once the front end is up so you can work comfortably from underneath.
Edit; You will also need to remove the brake cooling ducts, I believe.
Edit; You will also need to remove the brake cooling ducts, I believe.
Banned Scam/Spammer
Joined: Feb 2007
Posts: 50,093
Likes: 267
From: Oklahoma City
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
