What are you guys thoughts on....
Thread Starter
Pro
Joined: Oct 2009
Posts: 680
Likes: 24
From: Durham North Carolina
What are you guys thoughts on....
Purchasing a set of 1.8 roller rockers? I can get a used set with a few hundred miles on them. I have a set of 243s waiting to go on, and would do them at the same time. Any thoughts? Are the gains worthwhile?
Drifting
Joined: Oct 2006
Posts: 1,375
Likes: 3
From: East Tn.
Been there and done that, my tuner (In tune Motorsport, East Tn.)
Waste of time and money, headers and a tune is a good start with your 243 heads
You can mill apx.015 or use a thinner gasket before you install your heads to help raise your c.r. to 11:1
Waste of time and money, headers and a tune is a good start with your 243 heads
You can mill apx.015 or use a thinner gasket before you install your heads to help raise your c.r. to 11:1
Last edited by BobbyG123; Jun 29, 2010 at 01:11 AM.
