CCP/HKE Engine pricing
Thread Starter
Former Vendor
Joined: Apr 2006
Posts: 2,470
Likes: 2
From: Portland OR
St. Jude Donor '10-'11-'12
CCP/HKE Engine pricing
LS1/6 383 - $3405 w/ customers core
LS2 403 - $4755
6.0 Iron block 408 -$ 4355
LS3 416 - $5055
LS3 427 - $5430
LS2 427 - $6705
LSX 434 (1000hp) $6500 * Compstar crank
(1100+hp)$6850 * Dragonslayer
Upgrades are available on all components
Contact use for engines larger than 434 cid. We offer sizes all the way to 503 cid. Our 457 and 468 LS2 are some of the fastest n/a engines running pump gas on the streets.
All engines come with Callies C series crank, Callies Compstar rods, Wiseco pistons and GFX rings, ACL coated race bearings, ARP mainstuds, new GM block plugs.
All engines:
Bored and Honed with appropriate Torque Plates
Set Deck W/ Customer's Pistons and Surface to Correct for Required Quench
Line Hone Main Bores with ARP or OEM Fasteners
Completely balanced and blueprinted
All engines are precision built by HKE. An industry leader.
All prices are for the shortblock. We offer a complete long block package as well, precision built per your application. (Contact for pricing.)
LS2 403 - $4755
6.0 Iron block 408 -$ 4355
LS3 416 - $5055
LS3 427 - $5430
LS2 427 - $6705
LSX 434 (1000hp) $6500 * Compstar crank
(1100+hp)$6850 * Dragonslayer
Upgrades are available on all components
Contact use for engines larger than 434 cid. We offer sizes all the way to 503 cid. Our 457 and 468 LS2 are some of the fastest n/a engines running pump gas on the streets.
All engines come with Callies C series crank, Callies Compstar rods, Wiseco pistons and GFX rings, ACL coated race bearings, ARP mainstuds, new GM block plugs.
All engines:
Bored and Honed with appropriate Torque Plates
Set Deck W/ Customer's Pistons and Surface to Correct for Required Quench
Line Hone Main Bores with ARP or OEM Fasteners
Completely balanced and blueprinted
All engines are precision built by HKE. An industry leader.
All prices are for the shortblock. We offer a complete long block package as well, precision built per your application. (Contact for pricing.)
Last edited by 99blancoss; Nov 4, 2010 at 01:16 PM.
Thread Starter
Former Vendor
Joined: Apr 2006
Posts: 2,470
Likes: 2
From: Portland OR
St. Jude Donor '10-'11-'12
Here is an example of one of our/HKE big cubed engines. Pump gas friendly 11.3 compression 468 cid : 670hp 632 rwtq All motor and peaked at 6000 rpm
http://forums.corvetteforum.com/c6-t...o-results.html
http://forums.corvetteforum.com/c6-t...o-results.html
Thread Starter
Former Vendor
Joined: Apr 2006
Posts: 2,470
Likes: 2
From: Portland OR
St. Jude Donor '10-'11-'12
You want an SD1 in those cubic inches? Whats the application? How much boost are you going to run, how much power are you looking to make ?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
