EMC4OKC5@AOL.COM
Anyone looking for FLP headers?
Thread Starter
Race Director
Joined: Dec 1999
Posts: 13,459
Likes: 1
From: Westport, MA. www.tbyrnemotorsports.com - 1-877-4-TBYRNE
St. Jude Donor '06-'07
Anyone looking for FLP headers?
We have a large shipment of the C5 FLP long tube header packages shipping to us in the next few days and are offering discounted pricing to the first 10 orders that come in from the Forum. A little info about this package is -
This C5 Corvette Header Kit will give you the ability to bring your Vette back to stock if and when you choose to without having to but additional parts that you had to cut off with other kits. It is designed to bolt up to any muffler back system. The car that this package was tested on picked up 27 rwhp and 23 rwtq. The only mod was this header package. The clamps used have a V-flange which will allow you to switch from cats to offroads in about 30 minutes. Kit comes with the following items -
Long Tube Headers with inch and three quarter tubes and true three inch collector.
Bolts and Gasket.
Hi Flow Catalytic Converters 2.5"
Off Road Replacement Pipe 2.5"
X-Pipe with flange for connection to stock or aftermarket exhaust.
Accessory Kit with V-flange Clamps and Band Clamps.
Please e-mail tbyrne@tbyrne.com for pricing!
Have a good day,
Tom
Melting Slicks
Joined: Dec 2000
Posts: 2,204
Likes: 5
From: Bethlehem PA
St. Jude Donor '03-'05-'06-'08-'10
Re: Anyone looking for FLP headers? (tbyrne)
Tom, got a set on my '98 and can tell you they look, fit and sound great with the CATS. And, they delivered 18 RWHP(334) and 14 more lbs. torque(344) on the dyno from a basically stock motor...a broader power band from 4-5.5KRPM. From the many systems that are available, this has to be IMO among the better...and I looked at many for all their +'s and minus'.
Joe
[Modified by C54FUN, 9:11 AM 4/11/2002]
Joe
[Modified by C54FUN, 9:11 AM 4/11/2002]
Race Director
Joined: Jan 2000
Posts: 12,407
Likes: 0
From: My barber didn't know when to quit... Do you?
Re: Anyone looking for FLP headers? (Impala SS Z06)
Can you e-mail me the price...
dougdev@hotmail.com
Also on a side note...do you have any cleaning kits in stock for the Donaldson LS6-Blackwing?
dougdev@hotmail.com
Also on a side note...do you have any cleaning kits in stock for the Donaldson LS6-Blackwing?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Race Director
Joined: Dec 1999
Posts: 13,459
Likes: 1
From: Westport, MA. www.tbyrnemotorsports.com - 1-877-4-TBYRNE
St. Jude Donor '06-'07
Re: Anyone looking for FLP headers? (mfrnka)
This package doesn't come with the 02 simms. They are available seperate for $89.99.
If you e-mail for pricing please note that you have a C5. This way we don't send you pricing for an f-body package. 6 slots open for this price!
We usually use the Holley cleaning kits for the Donaldson intake. They are in stock for $9.99 (part # 100-12).
Thanks,
Tom
www.tbyrnemotorsports.com
If you e-mail for pricing please note that you have a C5. This way we don't send you pricing for an f-body package. 6 slots open for this price!
We usually use the Holley cleaning kits for the Donaldson intake. They are in stock for $9.99 (part # 100-12).
Thanks,
Tom
www.tbyrnemotorsports.com
Thread Starter
Race Director
Joined: Dec 1999
Posts: 13,459
Likes: 1
From: Westport, MA. www.tbyrnemotorsports.com - 1-877-4-TBYRNE
St. Jude Donor '06-'07
Re: Anyone looking for FLP headers? (QUIKSLVR02)