Installed LS6 intake today &....
Thread Starter
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
Installed LS6 intake today &....
It was an extremely easy job...about 1 1/2 hours taking care not to drop anything down the intake ports, but no noticable SOP difference yet.
Did not do the idle re-learn, is that an issue?
Will be at the track tomorrow nite so we will see what the ET looks like. :cheers:
Did not do the idle re-learn, is that an issue?
Will be at the track tomorrow nite so we will see what the ET looks like. :cheers:
Thread Starter
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
Re: Installed LS6 intake today &.... (borba)
I just got back from an 1 hour drive...and yes, it is definatley worth the $.
I can feel SOP difference now, and can't wait til tomorrow nite to see the ET improvment.
We ran Wed nite so I have a good base line.
Cheap, easy install, all the right ingrediants for a good mod!
I can feel SOP difference now, and can't wait til tomorrow nite to see the ET improvment.
We ran Wed nite so I have a good base line.
Cheap, easy install, all the right ingrediants for a good mod!
Thread Starter
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
Re: Installed LS6 intake today &.... (2000^C5)
Went with SLP since the package included the coolant tube plugs & alternate front tube. I priced the manifold alone for about the same.
Several forum vendors have them for good$...I paid $399 plus $26 or so ship & handling.
I recomend this mod! :cheers:
Several forum vendors have them for good$...I paid $399 plus $26 or so ship & handling.
I recomend this mod! :cheers:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: May 1999
Posts: 2,573
Likes: 0
From: Tewksbury MA
Melting Slicks
Joined: Dec 2000
Posts: 2,204
Likes: 5
From: Bethlehem PA
St. Jude Donor '03-'05-'06-'08-'10
Re: Installed LS6 intake today &.... (TLewis4095)
Yes, count me in with TL, got mine from SLP ($399.) and the install is a piece of cake. I did get some numbers on the dyno (334RWHP and 344 Ft. Lbs. of Torque)and the "intake coupled with headers", got 20 RWHP and 15 FT. Lbs. of torque at peak (18-20 in the 4-5500 RPM range) benefit from both over the previous baseline. Mine is basically a stock motor. I will say this, the delivery of power is noticeably smoother and starting at 3500 things get going and at 4500 watch the tach. If you are a bolt-on kind of person, headers and this intake do produce power/results.
Joe
Joe
Racer
Joined: Feb 2000
Posts: 410
Likes: 0
From: Coppell TX
Re: Installed LS6 intake today &.... (Speed-Racer)
I agree the slp intake got me 7rwhp and 11tq on the dyno.
I will see what it does at the track
98 Silver C5
Homeade intake
Tri-flo exhaust
3.42 gears
2800 Vig
trans cooler
LGM headers
TTS Loader
SLP Intake (just installed)
12.2 @110
I will see what it does at the track
98 Silver C5
Homeade intake
Tri-flo exhaust
3.42 gears
2800 Vig
trans cooler
LGM headers
TTS Loader
SLP Intake (just installed)
12.2 @110