ecs diff brace rubs :(
Thread Starter
Pro
Joined: Oct 2009
Posts: 712
Likes: 0
From: Panama City Beach Florida
ecs diff brace rubs :(
so the the long rod on the bottom passenger side of the diff/trans is rubbing and digging into the rear cradle. I also think it is responsible for the clunk sound I am getting. Everytime I jack that side of the car up and lower it I hear clunk. I saw that it rubbed when I installed it, but dont see how it can be changed. Anyone ever have this issue?
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,224
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Read the instructions! 
(kidding with you, dont get upset)
You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
(kidding with you, dont get upset)You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
Heel & Toe
Joined: Dec 2011
Posts: 20
Likes: 0
From: Pensacola FL
Read the instructions! (kidding with you, dont get upset)
You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
(kidding with you, dont get upset)You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
Melting Slicks
Joined: Aug 2005
Posts: 2,960
Likes: 112
From: New Braunfels TX
Read the instructions! (kidding with you, dont get upset)
You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
(kidding with you, dont get upset)You have the rod on the outside of the bracketry, or you did not install the bushing on the inside of the bracketry. The brace will fit without any modifications to it, or the cradle.
Feel free to give us a call if you still have any problems.
100% I did the same thing. I have the yellow paint marker on the cradle still where I was going to notch it. Then I pulled out the instructions 
Le Mans Master
Joined: May 2007
Posts: 5,393
Likes: 17
From: Belleville Mich.
