Engine swap
Thread Starter
Heel & Toe
Joined: Mar 2011
Posts: 17
Likes: 0
Engine swap
I have a 98 couple that I am going to pull the engine and replace with a 2004 Z06 LS6. Will the PCM from the 98 work with the LS6? Both are 6speeds... Any "things" I need to watch out for ... Thanks!
BB
BB
Instructor
Joined: Feb 2007
Posts: 122
Likes: 0
From: Charleston SC
PCM works fine. I put a 2004 LS6 crate motor in mine. Its basically the same engine with a little bigger cam and slightly better flowing heads. I would get a tune once its done, but it's not needed unless you added some extra power adders. I pulled mine out the top using instructions on LS1howto. I do have a 2002 although, I'm not sure if our PCMs are different.
Last edited by Xavier Blade; Mar 20, 2011 at 12:47 AM. Reason: Newer car
