New guy needs help
Thread Starter
Heel & Toe
Joined: Feb 2010
Posts: 23
Likes: 0
From: South Elgin Il
New guy needs help
All,
I have looked at site many times but don't post at all. In need of help and hope someone can assist. I am installing headers in 03 Zo6 and pulled wires out of oil temp sensor connector. I have picked up new connector with pig tail but need to know what wire goes to what side of sensor. Existing wires are black and a green with white stripe. Any help would be much appreciated, thanks again..
I have looked at site many times but don't post at all. In need of help and hope someone can assist. I am installing headers in 03 Zo6 and pulled wires out of oil temp sensor connector. I have picked up new connector with pig tail but need to know what wire goes to what side of sensor. Existing wires are black and a green with white stripe. Any help would be much appreciated, thanks again..
Tech Contributor
Joined: Jan 2007
Posts: 19,246
Likes: 1,092
From: Dyer, IN
All,
I have looked at site many times but don't post at all. In need of help and hope someone can assist. I am installing headers in 03 Zo6 and pulled wires out of oil temp sensor connector. I have picked up new connector with pig tail but need to know what wire goes to what side of sensor. Existing wires are black and a green with white stripe. Any help would be much appreciated, thanks again..
I have looked at site many times but don't post at all. In need of help and hope someone can assist. I am installing headers in 03 Zo6 and pulled wires out of oil temp sensor connector. I have picked up new connector with pig tail but need to know what wire goes to what side of sensor. Existing wires are black and a green with white stripe. Any help would be much appreciated, thanks again..
http://forums.corvetteforum.com/1574602397-post8.html
Last edited by lucky131969; Apr 16, 2011 at 08:41 PM.
Thread Starter
Heel & Toe
Joined: Feb 2010
Posts: 23
Likes: 0
From: South Elgin Il
Thanks for the quick reply. I did not think it would matter which wire went to what side. Your diagram does help as the connector does have an A and B side, I will put black wire to A side to be sure. Thanks again, Anthony..
