Need Help On Lowering
Thread Starter
Former Vendor
Joined: Dec 2001
Posts: 5,261
Likes: 1
From: The Presidential Suite Elite Street, MD
St. Jude Donor '08-'09-'10
Need Help On Lowering
I want to lower my Z06 down, and want to use the factory bolts. What is the best and easiest way to go about doing this. Also after doing so, is it a good idea to go and have a 4 wheel alignment done. Also how low will it make the car, and what is the biggest size wheels and tires I can put underneath. Thanks for any help you can give.
:cheers: :chevy
:cheers: :chevy
Drifting
Joined: Mar 2001
Posts: 1,270
Likes: 0
From: Rockford IL
Re: Need Help On Lowering (Z06Joe)
Joe, look in the tech section, it will tell you step by step how to do it, very easy, expect about an inch drop useing stock bolts, and yes you should have it aligned after lowering. You can e-mail me if you have any other questions, or if you want to know how to make it really low!! :D
