Windshield washer ???
Thread Starter
Instructor
Joined: Feb 2001
Posts: 132
Likes: 0
From: cameron mo
Windshield washer ???
washer pump does not run
I am asking if anyone went thru this already ---
what we know thus far
there is no voltage on pin A ckt 94 at the pump motor
gnd ckt 150 is good
when you hit washer switch --wiper blades do 1 stroke and park
as it should
12v path is switch to C219 pin E to C2 F6 to C3 A6
and then pump motor
1. does anyone know where C219 is located?
2. is it possible to open underhood elec center and test
for 12v on C2 F6 or C3 A6?
all this hoping to not replace switch in steering colum
thanks for your help
Print on page 8-183 book 1 of FSM
I am asking if anyone went thru this already ---
what we know thus far
there is no voltage on pin A ckt 94 at the pump motor
gnd ckt 150 is good
when you hit washer switch --wiper blades do 1 stroke and park
as it should
12v path is switch to C219 pin E to C2 F6 to C3 A6
and then pump motor
1. does anyone know where C219 is located?
2. is it possible to open underhood elec center and test
for 12v on C2 F6 or C3 A6?
all this hoping to not replace switch in steering colum
thanks for your help
Print on page 8-183 book 1 of FSM
Last edited by corveteer; May 10, 2011 at 09:02 PM. Reason: clean up
