Bottom seat needs padding
Thread Starter
Instructor
Joined: Nov 2008
Posts: 114
Likes: 0
Bottom seat needs padding
I know there is do-it-yourself's on this but has anyone removed the bottom drivers seat and repadded it? Just wondered how difficult is for someone that has never done this before?
Thanks,
Mike
Thanks,
Mike
Team Owner
Joined: Dec 1999
Posts: 174,312
Likes: 1,216
From: Here
Pilot of Beer Force 1
Tampa Regional Coordinator
CI 4-5-6-7-8 Veteran
Organizer St. Jude Fundraiser
I believe in the Beer Fairy
its pretty easy...just make sure before you remove the seat from the car that you raise it all the way UP so you can get to the rails
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 243
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
If you're going to repair/replace the bottom seat foam, I would recommend adding a piece of padding on top of the "trapeze" wires. They cut into the underside of the foam over time. I used the 1/4" thick insulated padding that you can buy by the roll at some AP stores. It has the foil on one side.
Banned Scam/Spammer
Joined: Feb 2007
Posts: 50,093
Likes: 267
From: Oklahoma City
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Super easy. Check out our rebuild kit if you haven't already
http://www.shop.jwmotoring.com/produ...&categoryId=15
http://www.shop.jwmotoring.com/produ...&categoryId=15
