CEL issues - DynoScan Results.
I have been on the site for a short while but I have not posted anything. I have recently purchased a 2001 Convertible / Manual with a lot of miles on it (109,000) and a few days after purchase, the CEL came on. I checked the codes and found P0172 / P0175, indicating that both bays are running rich.
Since then, I have changed plugs, wires, front O2 sensors, cleaned the MAF sensor with MAF sensor cleaner, changed oil/filter, changed air filter.
I still have the same problem. So, I connected the laptop with DynoScan and ran three recordings:
Normal drive:
https://docs.google.com/leaf?id=0B1e...kMjhm&hl=en_US
Idle:
https://docs.google.com/leaf?id=0B1e...hM2U0&hl=en_US
Idle, then drive:
https://docs.google.com/leaf?id=0B1e...mMjc2&hl=en_US
I also have a copy of the codes and freeze frame here:

If anyone has any ideas, I would appreciate the help. I used to have a 1996 Vette and from memory (long time ago) that could accelerate better than this 2001. Sometimes it feels great and sometimes not, just sluggish, sometimes I feel hesitation also. I just want it to run smooth and without CEL

I am not sure if anyone had done any mods on the car.







