Fixed Procharger overheating - fan WAS wired backwards
Thread Starter
Instructor
Joined: Jan 2002
Posts: 102
Likes: 0
From: Phoenix AZ
Fixed Procharger overheating - fan WAS wired backwards
I posted a week ago about my friends car overheating after we put in the Procharger. It turns out that the fan was wired backwards, so we switched the wires it works fine now.
Supporting Vendor
Joined: Feb 2000
Posts: 7,302
Likes: 1
From: Los Angeles, CA
St. Jude Donor '03-'04-'05-'06
Re: Fixed Procharger overheating - fan WAS wired backwards (SomeDay)
SomeDay,
Glad we could help you out with the tech support.
We had the same problem and when I saw your post, I knew what the issue was.
What is the car running at now, temp wise?
Shawn
Glad we could help you out with the tech support.
We had the same problem and when I saw your post, I knew what the issue was.
What is the car running at now, temp wise?
Shawn
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Team Owner
Joined: May 2000
Posts: 25,346
Likes: 222
From: Frisco, TX
Re: Fixed Procharger overheating - fan WAS wired backwards (pkmoose)
good to hear it was something simple :yesnod:
-- I remember building engines years ago and getting some weird results at the first start-up. It's nice to hear that this one was so easy to resolve. Ain't this Forum something!? :cheers: By the way, now that this chapter is past you, how hard was that do-it-yourself install? :confused:
[Modified by SteveL2, 4:26 PM 5/5/2002]
Thread Starter
Instructor
Joined: Jan 2002
Posts: 102
Likes: 0
From: Phoenix AZ
Re: Fixed Procharger overheating - fan WAS wired backwards (SteveL2)
Actually it wasn't too bad. The hardest part was getting all the tubing to fit. It took us about 13 hours to finish, plus a few more hours to do the gages (boost and fuel pressure).
