Simple roll Cage for a C5 coupe
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,479
Likes: 17
From: Miami Fl
Simple roll Cage for a C5 coupe
Does anyone have any suggestions for a roll cage that is tech passable at Morosso speedway in Fl? Am putting in an ati Sc with headers in addition to an ati racing balance and crank keying (exhaust, xpipe, Throttle body coolant bypass, larger maf air sensor, 172 stat, already in). Breathless will do the work. To run at Morosso you need a cage for < 12.99 sec. This car is also a daily driver and I like to take the top off as well as use the rear for scuba gear stroage. Any help is appreciated.
[Modified by urslooow, 7:53 PM 5/19/2002]
[Modified by urslooow, 7:53 PM 5/19/2002]
Le Mans Master
Joined: Jul 1999
Posts: 5,005
Likes: 38
From: jackson nj
Re: Simple roll Cage for a C5 coupe (urslooow)
Nothing is really "simple" but why don't you try "Wolfe Racecraft" ( http://www.wolferacecraft.com ) as they have both a weld in and bolt in. If you plan on going slower then 10.0 and don't modify the firewall you can go with a 5 point.
Team Owner
Joined: Oct 2001
Posts: 46,766
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
Re: Simple roll Cage for a C5 coupe (urslooow)
Seeing as Breathless is doing the other work, why not speak to Ernie about his safety products? :yesnod: Item # 100-246C $389.99 according to the new Breathless Performance Catalog. :D
Bob
Bob
Le Mans Master
Joined: Aug 2000
Posts: 6,447
Likes: 0
From: Scottsdale, AZ
Cruise-In III Veteran
links to roll cage
Team Owner
Joined: Jun 2001
Posts: 100,672
Likes: 2
From: Cleveland OH
Re: Simple roll Cage for a C5 coupe (Red98C5)
Nothing is really "simple" but why don't you try "Wolfe Racecraft" ( http://www.wolferacecraft.com ) as they have both a weld in and bolt in. If you plan on going slower then 10.0 and don't modify the firewall you can go with a 5 point.
