Fast 92 install help!
Thread Starter
Instructor
Joined: Feb 2012
Posts: 169
Likes: 0
From: Shreveport Louisiana
Fast 92 install help!
Hey guys, i installed my fast 92 and used a 90mm throttle body on it and I am looking for piping to connect the throttle body to the air bridge.
Do I need a new air bridge or is there custom silicone tubing made for is swap? What are you using? I would prefer black over any color.
Do I need a new air bridge or is there custom silicone tubing made for is swap? What are you using? I would prefer black over any color.
Drifting
Joined: Oct 2002
Posts: 1,335
Likes: 76
From: Bedford Va.
I have a carbon fiber bridge I bought back in 2003.
The connector/coupler that came with it is the same one I use now.
the stock TB and the gm 90mm TB outer dia. is very close.
you can try these people for a coupler
http://www.bakerprecision.com/hps_main_index.htm
The connector/coupler that came with it is the same one I use now.
the stock TB and the gm 90mm TB outer dia. is very close.
you can try these people for a coupler
http://www.bakerprecision.com/hps_main_index.htm
Thread Starter
Instructor
Joined: Feb 2012
Posts: 169
Likes: 0
From: Shreveport Louisiana
The stock air bridge is oval on the end, so I need to find one with a round end the tb and oval for the air bridge.
I wouldn't be opposed to buying a new air bridge and coupler....
I wouldn't be opposed to buying a new air bridge and coupler....
Drifting
Joined: Apr 2009
Posts: 1,898
Likes: 10
From: Morrisville PA
I purchased the vararam powerduct and I bought 12" of 4" black silicone on ebay. The brand was OBX. It was $25.
To cut the silicone evenly, get a worm gear clamp and put it on snug. Then using razor blade, just trace the clamp. Hoses come out looking factory.
To cut the silicone evenly, get a worm gear clamp and put it on snug. Then using razor blade, just trace the clamp. Hoses come out looking factory.
