When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im need a good shop anywhere near sandusky ohio or within 200 to 300 miles or so.. lookin to do 3:73 gears, stall converter, input output shafts and tranny cooler. on a 98 c5
Might want to call Xtreme Performance in North Ridgeville, OH. Clean, well-equipped facility. The proprietor owns two Vettes and they've done it right both times I've been there. You can Google for the info and their website.
There is always tach it up motorsports thats just north of Dayton. Always heard good things about them. I just did 3.42, yank ss3600 and trans cooler in my 2000 last weekend. Not to bad of a job. Good luck
From: Garfield Heights (AKA:Garbage Hts.) Ohio USA
Cruise-In VII Veteran
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18
Oldtimer
Originally Posted by pickleseimer
Might want to call Xtreme Performance in North Ridgeville, OH. Clean, well-equipped facility. The proprietor owns two Vettes and they've done it right both times I've been there. You can Google for the info and their website.
If you call Extreme Performance ask Owner Steve Ali if he still gives 10% discounts to CorvetteForum members.
There is always tach it up motorsports thats just north of Dayton. Always heard good things about them. I just did 3.42, yank ss3600 and trans cooler in my 2000 last weekend. Not to bad of a job. Good luck
yep; Dale Clark.
tell him that Tim "Mike Mercury" mentioned his shop
There is always tach it up motorsports thats just north of Dayton. Always heard good things about them. I just did 3.42, yank ss3600 and trans cooler in my 2000 last weekend. Not to bad of a job. Good luck