[PAGING] Nick Agostino
Thread Starter
Melting Slicks
Joined: Jul 2000
Posts: 2,541
Likes: 0
From: Chicago
[PAGING] Nick Agostino
Can you tell me the waiting period for a set of stage II heads and cam, I tried emailing you and left a message in the general box at your office today because yours was full. But I though you might be cruising the forum and see this topic. So if your out there lemme know, otherwise I'll wait to hear from you on the phone.
Thanks,
Adam
PS If anyone else has ordered heads/cam from ARE and knows how long it would take to get them made lemme know. Thanks :cheers:
Thanks,
Adam
PS If anyone else has ordered heads/cam from ARE and knows how long it would take to get them made lemme know. Thanks :cheers:
Le Mans Master
Joined: Nov 2000
Posts: 7,294
Likes: 1
From: Coral Springs Florida
Re: [PAGING] Nick Agostino (NassyVette)
I know Nick keeps several sets on the shelf at all times unless there is a custom port or machining to be done. My heads were available within 2 weeks and the cam selection is usally available as well(Lunati, Compcams). If you can't get a hold of Nick. Mike Norris is a respected tuner here in Florida and I know he may keep the ARE product in stock as well.:yesnod:
Either way ...You good to go with Agostino Racing Products. I'm really happy with mine and I spent many hours looking for the right parts and the right vendor...Good Choice!:D
Either way ...You good to go with Agostino Racing Products. I'm really happy with mine and I spent many hours looking for the right parts and the right vendor...Good Choice!:D
Le Mans Master
Joined: Apr 1999
Posts: 7,820
Likes: 0
From: Burlington ON
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: [PAGING] Nick Agostino (NassyVette)
Nick is very busy at the shop but I can definitely assist you with any questions about the heads you may have, as well as pricing and availability.
I believe on a set of Stage II heads you would be looking at about a 3-4 week build time. Stage I's would be slightly quicker, around 2-3 weeks.
Drop me an email if you have any questions or want to place an order.
[Modified by MattG, 11:02 PM 6/5/2002]
I believe on a set of Stage II heads you would be looking at about a 3-4 week build time. Stage I's would be slightly quicker, around 2-3 weeks.
Drop me an email if you have any questions or want to place an order.
[Modified by MattG, 11:02 PM 6/5/2002]
