CARPC instead Guages
Thread Starter
Burning Brakes
Joined: Feb 2008
Posts: 949
Likes: 1
From: Tampa fl
St. Jude Donor '14
CARPC instead Guages
I am getting ready to do some mods to my car and will require some additional guages. so I was thinking the GTR has a CARPC that displays the guages instead of having 20+ guages on a POD. does anyone have any experience with this or am I just dreaming. I want to keep the stock pressures, temps etc. on the DIC but new stuff reading to the CARPC.
Drifting
Joined: Apr 2010
Posts: 1,479
Likes: 33
From: Jacksonville Florida
Lots of folks have started doing some nice installs using Android Tablets and the Torque App. I've been looking into doing that and there are a lot of good articles by those that have done it. Looks promising.
Safety Car
Joined: Apr 2004
Posts: 3,932
Likes: 8
From: Hayward California
Yup, that would be the easiest. There are also gauges now that plug into the OBDII port and can display most of what we need.
That Torque App looks nice except I'm not sure it can do logging. If you need that check out the Innovate OT-2.
That Torque App looks nice except I'm not sure it can do logging. If you need that check out the Innovate OT-2.
Last edited by AVB; Mar 5, 2013 at 01:08 PM.
Thread Starter
Burning Brakes
Joined: Feb 2008
Posts: 949
Likes: 1
From: Tampa fl
St. Jude Donor '14
what I am trying to accomplish is having my stock temps pressures etc running to my on board computer then the turbo setup guages run to a screen instead if a million guages on a pod. so I have researched a software that will do this and I am going to use what's called a raspberry pi and a HDMI cable to my double din I have in now
Drifting
Joined: Dec 2008
Posts: 1,728
Likes: 25
From: new york new york
AVB any idea on how accurate the wide band is ?
Drifting
Joined: Jul 2005
Posts: 1,484
Likes: 27
From: Torrance Calif
