little 7/4 project before starting BBQ
Thread Starter
Racer
Joined: Sep 2010
Posts: 304
Likes: 8
From: Los Angeles CA
little 7/4 project before starting BBQ
plasti dip = ~$10
will see how it turns out.
I know I can always peel it off.
and few random pics.
Happy 7/4 Corvette forum!
I'll do 3 layer
Audi makes some cool looking brakes
s30z spotted at the junkyard in Long Beach, CA 6/29/13
old vs new LS1/6 water pump
will see how it turns out.
I know I can always peel it off.
and few random pics.
Happy 7/4 Corvette forum!
I'll do 3 layer
Audi makes some cool looking brakes
s30z spotted at the junkyard in Long Beach, CA 6/29/13
old vs new LS1/6 water pump
Last edited by rkdc5z06; Jul 4, 2013 at 02:11 PM.
Thread Starter
Racer
Joined: Sep 2010
Posts: 304
Likes: 8
From: Los Angeles CA
Before...
After...
TIPS:
Before I applied, I tried on plastic bucket to see how this works. after drying, you can actually peel off when applied thick enough.
When removing the tape after drying the plastidip, be careful peeling off, and use rular or razor to press down the plasti dip that will be remain on the surfice.
I kinda messed up on the curved corner, but I don't care since I can just do it all over.
maybe this was a practice. Cheers~
After...
TIPS:
Before I applied, I tried on plastic bucket to see how this works. after drying, you can actually peel off when applied thick enough.
When removing the tape after drying the plastidip, be careful peeling off, and use rular or razor to press down the plasti dip that will be remain on the surfice.
I kinda messed up on the curved corner, but I don't care since I can just do it all over.
maybe this was a practice. Cheers~
Thread Starter
Racer
Joined: Sep 2010
Posts: 304
Likes: 8
From: Los Angeles CA
