Buck/Wave/2000
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
Buck/Wave/2000
I talked to Mike at Yank today. He confirmed what you say. Go with the
sy3500 with my mods. They will be as follows. Thanks for your input. This is as certain as I can be re: a TC.
heads 2.02/1.55, comp cam 216/220, FLP headers, Z06 exhaust, asp pulley, ported throttle body, cold air, MAF descreened, transgo,
Custom ignition wires, sy3500, 3.42 rear, tuning etc.
[Modified by jfpilla, 4:03 PM 7/2/2002]
sy3500 with my mods. They will be as follows. Thanks for your input. This is as certain as I can be re: a TC.
heads 2.02/1.55, comp cam 216/220, FLP headers, Z06 exhaust, asp pulley, ported throttle body, cold air, MAF descreened, transgo,
Custom ignition wires, sy3500, 3.42 rear, tuning etc.
[Modified by jfpilla, 4:03 PM 7/2/2002]
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Buck/Wave/2000 (jfpilla)
not to monkeywrench here but I've been debating about going to a ST3500.....I already have a new in the unopened box SY3500 :)
maybe you can force me to make the switch ;) :D :cheers:
maybe you can force me to make the switch ;) :D :cheers:
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
Re: Buck/Wave/2000 (Buckmaster)
I'm getting excited. My car is to be delivered mid august. Then one month break-in. I can't wait. What does transgo do that the tuning doesn't? Does Ed Wright take transgo into consideration when he sets shift points and firmness?
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
Re: Buck/Wave/2000 (Buckmaster)
This is what I think I know about Transgo.
It's a safer way to firm up shifts than just tuning.
It quickens both wot and pt shifts and there is no choice to do one only.
Does it quicken shifts?
Can I firm and quicken part throttle shifts slightly and use tuning to go more at wot?
Did I miss anything?
It's a safer way to firm up shifts than just tuning.
It quickens both wot and pt shifts and there is no choice to do one only.
Does it quicken shifts?
Can I firm and quicken part throttle shifts slightly and use tuning to go more at wot?
Did I miss anything?
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Buck/Wave/2000 (jfpilla)
It's a deal. Do I get the warranty? Tell me what you want prepaid freight.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Buck/Wave/2000 (jfpilla)
Did you get mail?
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
Re: Buck/Wave/2000 (Buckmaster)
Just ordered Transgo. sy3500 is next. Anything else you want me to spend money on. Thanks for the info. I know I'll love it.
[Modified by jfpilla, 4:01 PM 7/2/2002]
[Modified by jfpilla, 4:01 PM 7/2/2002]