Gm Asa cam
Thread Starter
3rd Gear
Joined: Sep 2013
Posts: 3
Likes: 0
Gm Asa cam
Hello, if there is anyone willing to help me out it would be greatly appreciated! I have a 2001 corvette coupe it has the ls1 engine and I am wanting to put a Gm asa cam into it next season and I am wondering if someone could tell me what all ill need for my car to run properly and everything turn out good, like what parts do I need to upgrade to successfully cam my car? Hope to hear from someone thanks!
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
that cam used the ls6 spring so long as you didn't go over the stock ls6 redline.
if you're going to beat it like a rented mule i would probably use the pac nitrided springs. would seem to be a better fit for sustained high rpm use
if you're going to beat it like a rented mule i would probably use the pac nitrided springs. would seem to be a better fit for sustained high rpm use
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
you'll have the sound with that much duration and a 110lsa that cam will rip hard in the midrange and top end
new ls6 spring kit is $65 and you can use your existing locks and retainers
if you want a little lope that should give it to you
new ls6 spring kit is $65 and you can use your existing locks and retainers
if you want a little lope that should give it to you
