fast 102mm users
Thread Starter
Pro
Joined: Apr 2010
Posts: 621
Likes: 1
From: westland mi
St. Jude Donor '12
fast 102mm users
I'm going to be running a fast 102mm intake and a NW 102mm throttle body and a tsp 100mm mass air flow, will this work with the vararam or should i get a new air intake? (
if so which one ?)
where to get couplers?
anything else i would need
thanks
if so which one ?)
where to get couplers?
anything else i would need
thanks
Supporting Vendor
Joined: Jul 2010
Posts: 7,468
Likes: 133
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
Hi,
I'm going to be putting a 100mm MAF with ls3 or ls7 sensor. What sensor are you going to run?
Thanks
Christian
I'm going to be putting a 100mm MAF with ls3 or ls7 sensor. What sensor are you going to run?
Thanks
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Supporting Vendor
Joined: Jul 2010
Posts: 7,468
Likes: 133
From: SacCityCorvette.com in Sacramento Ca Join us on Facebook!
St. Jude Donor '12,'13,'15,'16,'17
What pigtail did you use to adapt the LS3 card maf? Do you have any pictures of your setup? Do you have a tune you could share so we have the Maf tables. Im not doing the fast 102 manifold or TB yet, but it in the future.For now, just the 100mm maf to go with my ls7 ported intake and TB.
Thanks.
Christian
