Trouble Codes
Thread Starter
Racer
Joined: May 2005
Posts: 324
Likes: 1
From: Homestead Florida
Trouble Codes
I just got my EBCM back today from getting repaired.I connected it back on the car and the C1214 code is gone.But the ABS,Traction Control lights are still on in the dash and in the DIC.I checked the codes and its showing C1232 H C and C1296 H C.What are these codes ? And do you guys think my EBCM is still bad ?
Pro
Joined: May 2011
Posts: 580
Likes: 1
From: Chicago Suburb
St. Jude Donor '13
Since these are history codes, try re-setting DIC, run the car a bit and see what's showing on the DIC. Trouble code translations are listed in stickies (http://www.c5forum.com/ayc/dtcdic.php) or simply google it.
Last edited by tacman; Oct 22, 2013 at 11:49 AM. Reason: Added link
Thread Starter
Racer
Joined: May 2005
Posts: 324
Likes: 1
From: Homestead Florida
Since these are history codes, try re-setting DIC, run the car a bit and see what's showing on the DIC. Trouble code translations are listed in stickies (http://www.c5forum.com/ayc/dtcdic.php) or simply google it.
Drifting
Joined: Feb 2008
Posts: 1,596
Likes: 67
From: Bahama North Carolina
Those aren't history codes. They are clearly marked with a C or current. The C1232 H C is a wheel speed sensor (my list says LF but some code lists have this wrong and it is really the RF. I'm not sure which is correct.) This is probably not related to the ebcm and possibly just a loose connection at the hub. The C1296 H C is the master cylinder pressure circuit. I am not familiar with that code.
Pro
Joined: May 2011
Posts: 580
Likes: 1
From: Chicago Suburb
St. Jude Donor '13
Sorry for posting the wrong info. Mom always said you learn something new every day. Thanks for the clarification.
BTW, I've had occasion to pull codes on my '01Z; I only saw H or C codes - not both.
BTW, I've had occasion to pull codes on my '01Z; I only saw H or C codes - not both.
Last edited by tacman; Oct 24, 2013 at 12:38 PM. Reason: Added
