Help
Thread Starter
Drifting
Joined: Oct 2013
Posts: 1,286
Likes: 206
From: nixa Missouri
Help
I have a 98 vert and i need to replace the resistor for the blower motor for the heat and a/c.
I have pull out the cover panel in the passenger side i can see the blower motor plain as day and the elec. connector to it.
I can see the other end of that wire but i am unable to even see the 3 scres holding the resistor in place and there is also another wire loom going to the part on the new 1 that i am unable to even see or feel in the car.
Has any 1 done this repair if so help me out here im at a total loss.
I have pull out the cover panel in the passenger side i can see the blower motor plain as day and the elec. connector to it.
I can see the other end of that wire but i am unable to even see the 3 scres holding the resistor in place and there is also another wire loom going to the part on the new 1 that i am unable to even see or feel in the car.
Has any 1 done this repair if so help me out here im at a total loss.
Pro
Joined: Sep 2011
Posts: 505
Likes: 4
From: Colfax WI
Pro
Joined: Sep 2011
Posts: 505
Likes: 4
From: Colfax WI
Thread Starter
Drifting
Joined: Oct 2013
Posts: 1,286
Likes: 206
From: nixa Missouri
tks
im asking about the resistor not the fan motor i can see it real plain
having nothing but trouble trying to find this damn resistor i can see the wire going from the motor to it. But i cant see the screws for it at all.
Any 1 have any pics of this?
having nothing but trouble trying to find this damn resistor i can see the wire going from the motor to it. But i cant see the screws for it at all.
Any 1 have any pics of this?
Last edited by Red Devil Z51; Feb 2, 2014 at 12:44 AM.
Advanced
Joined: Jun 2013
Posts: 51
Likes: 4
From: Hampton VA
Here is what BC provided me, it made it easier........
http://forums.corvetteforum.com/priv...&pmid=16679597
Jim
http://forums.corvetteforum.com/priv...&pmid=16679597
Jim
Le Mans Master
Joined: Mar 2011
Posts: 6,835
Likes: 302
From: Columbia SC
Here is what BC provided me, it made it easier........
http://forums.corvetteforum.com/priv...&pmid=16679597
Jim
http://forums.corvetteforum.com/priv...&pmid=16679597
Jim
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Team Owner
Joined: Jul 2006
Posts: 22,155
Likes: 4,168
From: Kannapolis NC
I'm only telling you this to help you and others who might be searching for a similar problem. "HELP" is a terrible title for a thread. Everyone complains about the help function on the forum, but if you're thread was titled "Help with blower motor resistor" it would be much more searchable and findable.
