Training TPMS
Thread Starter
Advanced
Joined: Feb 2014
Posts: 61
Likes: 0
From: Hereford AZ
Training TPMS
I had a bad front L monitor. I bought a new one and trained it before installing. It seemed to work so I aborted the process for the other three working monitors. I turn on the ignition and the "service TPMS' message is now gone. With the new monitor on the front seat, I go out for a drive. Now, the message center displays all 4 tire with a blank psi reading. Did I screw up the process by aborting after the first monitor was trained?
Bob
Bob
Pro
Joined: Sep 2013
Posts: 538
Likes: 6
From: Knoxville TN
St. Jude Donor '14
When you program one, you have to program the other sensors too. You have 3 minutes to program all 4 sensors so you have about 45 seconds per to program it. I learned this the hard way.
